bullet-proof-jackets

Bulletproof Jacket

Protection level :

Protection level and degree of coverage are important to a certain point, the more the better and the Ballistic threat by a bullet depends, among other things, on its composition, shape, calibre, mass angle of incident and impact velocity.

We believe, the information given in this brief brochure is the best currently available on the subject. It may offer a helpful suggestion on the selection and care of Bullet Resistant Vest / Jackets, which you may choose to follow. It is not intended to supersede or conflict with local standards. It is subjected to revision as additional knowledge and experience are gained.

Chandra lakshmi provides wide range of high technology Body Protective Garments to choose from both Soft and Hard Armour to provide total and assured body protection against Bullet fired from Pistol, Revolver, Carbine and High Velocity SLR and Artillery Shells, as also against all kinds of fragments caused due to explosion of Improvised Explosive Devices (IED).

  • Quilted Aramid Fabric
  • Trauma Pad
  • Human Torso
  • Ceramic Plate
  • All Bullet Resistant Vests/Jackets we manufacture meet National Institute of Justice Standard (NIJ-STD) of USA.
  • Rigorous testing in R&D ensures that everything we manufacture will meet you most demanding standards.
bullet-proof-under-vest

Bullet Proof Under Vest

  1. Material of B.P. Jackets :- It should be made out from Aramid Fabric / UD Material and cloth harness.
    • Should conform to NIJ standard – 0101.04 Level IIIA.
  2. Protection Against all of the following Weapons with Muzzle Velocity of 405-425m/s
    • 9mm Bullet Fired from 5 Miters.
    • Pistol / Carbine from distance from 5mtrs.
    • .44 Megnum SWC from distance from 5mtrs.
  3. Area of Components of Soft Armour Panel

    Sr. No. Panel Standard Size (Sqr. Mtrs.)
    1 Front 0.15
    2 Back 0.24
    3 Total 0.39
  4. Weight of Under Vest: 2.5kg. to 3.0kg.
  5. Colour of Under Vest: White / Black / Navy Blue or as per customer Choice.
  6. Test Approval: Our Bullet Proof Jacket is test and approved by TBRL Chandigarh under DRDO Ministry of Defence.

Bullet Proof Executive Vest

Politicians, Executives and other high profile people concerned about their personal security, both at home or while traveling, wear the 2100 (Executive Vests). Easily removable Soft Amour Panels (SAP) allow for many different colour and style outer cover to be worn.

bullet-proof-hppe-plates

Hard Plate :- HPPE Plates & Ceramic Plates

To meet Level III and IV Protection, these multishot or monolith, flat curved or contoured plates can be supplied in a standard size of 255 × 305 mm or any other dimensions as required. 2105 Series Hard Armour Plates (BP Steel, Rubber Bonded for Bullet Trapping, Ceramic and Light Weight Composite Plates. Insert for Jackets have been specially designed for special forces used and offer unbeatable multishot capability against high velocity rifle rounds of 5.56 mm and 7.62 mm. The ability to defeat armour piercing ammunition at approx. 50 mtrs. distance make these plates the ideal choice for maximum protection. Yet another lightest composite material in the world which can defeat of 7.62 × 51 mm NATO Ball Ammunition of SLR and 7.62 × 39 mm Mild Steel Core of AK-47 from 10 mtrs. as per NIJ Standard having a weight of 1.6 kg of size 255 × 305 mm and 21 mm to 23 mm thick.

bullet-proof-over-vest

Bullet Proof Over Vest

  1. Material of B.P. Jackets :- It should be made out from Aramid Fabric / UD Material and cloth harness.

    • Should conform to NIJ standard – 0101.04 Level III.
  2. Protection Against all of the following Weapons :
    • 9mm Bullet Fired from 5 Miters.
    • 7.62 x 39mm AK-47 from distance from 10mtrs. (Milled Steel Core Imported Ammunition)
    • 7.62 x 51mm SLR from distance from 10mtrs. (NATO Ball Ammunition)
  3. HPPE plate size 10” x 12” HPPE Plate shall be used capable to free fire from SLR from a distance of 10 mtrs.
  4. HPPE plate shall have weight 1.6 Kg. Each plate
  5. Area of Components of Soft Armour Panel

    Sr. No. Panel Standard Size (Sqr. Mtrs.)
    1 Front 0.15
    2 Back 0.24
    3 Collar (Total) 0.06
    4 Shoulder (Total) 0.04
    5 Groin 0.06
    6 Total 0.55
  6. Weight of Under Vest: 7.0kg. to 7.5kg.
  7. Colour of Under Vest : White / Black / Navy Blue / Camouflage or as per customer Choice.
  8. Test Approval: Our Bullet Proof Jacket is test and approved by TBRL Chandigarh under DRDO Ministry of Defence.

Bullet Proof Cabins

Bullet Proof Cabins with the Good design and equipped with powerful features with the complete Bullet Proof Protection.

Bullet Proof Shield

Bullet Proof Sheild, with the best Bullet Proof Protection at the Startegic Entrance gates etc.

Bullet Proof Guard

Bullet Proof Guard Rooms are equipped with the Latest Bullet Proof Protection ideal for Strategic Locations.

bullet-proof-patka1

Bullet Proof Patka

The PATKA are available for Soldiers and Officers. Having protection for 9 mm at rear from 10 mtrs. And from 25 mtrc. AK47 or SLR at forehead. The weight of PATKA will be approx. 1.4 kg to 1.7 kg.

However, our R&D team is doing its best to reduce the weight and giving more protection area for lower and higher velocity bullets as well as for fragments of Artillery and Bomb Shell.

We, at Chandra Lakshmi have developed another model of PATKA (2110M modified) using anti corrosive coating with Steel Band which has an added feature of Steel Band corrosive productions not are in the 2110 & 2111 PATKA models would also have add on for Ear & Neck protection against 9 mm and 17 grain Steel fragments of Bomb and Artillery Shells, as also against all kinds of Improvised Explosive Devices (IED).

If you don’t find what you are looking for in this catalogue that does not mean it is not available. We are capable of modifying and designing to meet the specifications and exact customer’s requirements, whether it be just a minor adjustment or major alteration.

2110 Model, Bullet Proof PATKA (Steel Plane) for AK-47 at Front and 9 mm, at Rear.
2110 M (Modified) Model, Bullet Proof PATKA (Steel Plane) with Specially Anti Corrosive coating for AK-47 At Front and 9 mm, at rear.
2111 Model, Bullet Proof PATKA (Steel Plane) for AK-47 at Front and 9 mm, at rear & 9 mm protection with Kevlar Padding at Neck & Ear.

Complete Model

We, at Chandra Lakshmi have developed another model of PATKA 2111. This model would also have add on for Ear & Neck protection against 9 mm and 17 grain Steel fragments of Bomb and Artillery Shells, as also against all kinds of Improvised Explosive Devices (IED).

If you don’t find what you are looking for in this catalogue that does not mean it is not available. We are capable of modifying and designing to meet the specifications and exact customer’s requirements, whether it be just a minor adjustment or major alteration.

2111 Model, Bullet Proof PATKA (Steel Plane) for AK-47 at Front and 9 mm, at rear & 9mm protection with Kevlar Padding at Neck & Ear.
bullet-proof-morcha

Bullet Proof Morcha

5 mm/6 mm B.P. Steel Plate of 46″x27″

Weight App. 32-40 Kg. each Plate as per protection (AK-47 or SLR).

The Bullet Proof Morcha consists of three plates joined together with hinges. It can be used as picket for Sentry. Specially in the area of insurgency where the terrorist activities are more. It can be erected or dismantled in a very short period. The B.P. Steel Morcha replaces the Sand Bags.

BP Morcha Small

Technical Specification of Bullet Proof Morcha (Version 2009)

Features
  1. It shall have Three firing slots, One on each plate and firing is done in couching position.
  2. It shall have provided with two handles (One top and one bottom on each three plates) to carry and erect.
  3. Easy to erect and dismantle i.e. approx one minute total.
  4. Protection level- All plates against 7.62 x 51mm SLR – Nato Ball Ammunition and AK-47 & 56, 7.62 x 39mm Imported Ammunition as per NIJ standard Level – III 0108.01 at 90o from a distance of 10 meters.
  5. While installation at site each plate must have the provision to joint together with the help of strong hinges, which shall be riveted / bolted instead of welding for easy assembling and dismantling.
  6. Bullet Proof Morcha made from single plates without any kind of Joints or welding.
  7. There shall be no gap between the sheets / plates in assembled condition of BP Morcha.
Colour Colour of the Bullet Proof Morcha as per user choice.
Coverage Angle of the side plates shall be provided coverage from three directions i.e. front, Left and Right.
Dimensions (Plate)
Thickness (mm) 6.2 ± .5/0mm
Height (mm) 1200 ± 5mm (48″)
Width (mm) 914 ± 5mm (36″)
Firing Slot Each plate have sliding firing slot of size 175 ± 5 x 125 ± 5mm. All the windows should have inside cover of the same material.

Whenever the BP Morcha is fired upon and the port shutter gets damaged the replacement should be possible.

Weight of Plates 50 kgs. of each plate (±) 2kgs tolerance allowed in each plate.
Weight of Morcha Weight approx 150kgs ± 5kgs
Protection Level Each Plate is able to provide following protection Level-

  1. 7.62 x 51mm (SLR Nato Ball Ammunition) distance from 10 meters as per NIJ Level – III 0108.01.
  2. 7.62 x 39mm (AK-47 & 56 Imported Ammunition) distance from 10 meters as per NIJ Level – III 0108.01.
  3. Splinter of Grenade No. 36 HE from 10 meters.
Material (BP Steel) Our BP Steel is test and approved by TBRL Chandigarh under Ministry of Defence Lab or any other international Lab. BP Steel plate shall be heat treated to develop maximum resistance to penetration. We shall submit the BP Steel manufacturer material test report of each plate with the mentioning of plate number and lot number.
Wheels We shall provide the provision of wheels in this morcha, if required.
bullet-proof-sentry-post

bullet-proof-conical-roof

Bullet Proof Sentry Post

The Bullet Proof Sentry Post consists of three plates joined together with hinges. It can be used as picket for Sentry. Specially in the border area of insurgency where the terrorist activities are more. It can be erected or dismantled in a very short period.

Features:

  • This can be easily dismantled and assembled/installed with in Five Minutes.
  • Sentry Post has got facility to fire from inside on standing and sitting Position.
  • Sentry Post is tailor made in wood finish or as desired.

Conical Roof

Technical Specifications of Bullet Proof Sentry Post (Version 2009)

Features
  1. The Sentry Post should be able to accommodate two soldiers inside who can fire from the firing port standing as well as couched position from each side.
  2. It should have provided with two handles (One top and one bottom on each three plates) to carry and erect.
  3. Easy to erect and dismantle i.e. approx 15 minutes total.
  4. While installation at site each plate must have the provision to joint together with the help of strong hinges, which should be riveted / bolted instead of welding for easy assembling and dismantling.
  5. Bullet Proof Sentry Post must be made from single plates (front, side and Left) without any kind of Joints or welding as per enclosed drawings.
  6. Protection level- Side plates against 7.62 x 51mm (SLR) at 90ofrom a distance of 10 meters. Roof plates against 7.62 x 51mm (SLR) at 45 o from a distance of 10meters. The Roof / Top of the Sentry Post should be so designed to face angle fire from 45o(SLR) from 10mtrs. The surface of the roof should be slippery so that no metal or anything remains on the roof. It should have four triangular pieces joint together in conical shape. (as per drawings)
  7. All the three BP Steel Plates, front, Left and Right must have 2 firing slot window of size 12” x 12” on the upper portion of the each plate, & another window in the bottom of size 7”x5” which should be capable of protection against SLR, AK-47, from 10 mtrs. respectively. All the windows shall have inside cover of the same material. Each plate must be marked Left, Right, Front Side and Top and also its serial No. inside of the Post.
  8. The Sentry Post should have inside hooks for hanging Weapons / Binoculars / Compass / NVD’s and a stand for water bottle.
Colour Colour of the Bullet Proof Sentry Post as per user choice.
Coverage Angle of the side plates to be provided coverage from four directions i.e. Front, Left and Right alongwith Top. (as per drawings)
Dimensions (Plate)
Height (mm) Width (mm) Thickness (mm)
Front 1981 ± 5mm 1981 ± 5mm 1981 ± 5mm
Right 914 ± 5mm 914 ± 5mm 914 ± 5mm
Left 6.2 ± .5/0mm 6.2 ± .5/0mm 6.2 ± .5/0mm
Dimensions (Roof)
Thickness (mm) 4.1 ± .5/0mm
Shape Triangle (as per drawings)
Height from Center of Roof 2133mm (approx 7ft)
Weight of Roof 35kgs
Weight of Plates 105 kgs. of each plate (±) 2kgs tolerance allowed in each plate.
Weight of Sentry Post Weight approx 350kgs ± 5kgs with Roof.
Protection Level Each Plate is able to provide following protection Level-

  1. 7.62 x 51mm (SLR) distance from 10 meters.
  2. 7.62 x 39mm (AK-47) distance from 10 meters.
  3. Splinter of Grenade No. 36 HE from 10 meters.
Material (BP Steel) BP Steel is test and approved by TBRL Chandigarh under Ministry of Defence Lab or any other international Lab. BP Steel plate should be heat treated to develop maximum resistance to penetration. The tenderer should be submit the BP Steel manufacturer material test report of each plate with the mentioning of plate number and lot number
bullet-proof-podium

Bullet Proof Podium

Podium are used for the VVIP’s sitting on the Dias.

The B.P Podium covers and protects the area of 6 feet on each side,
and The total height is approximately 6 Feet.
(3 Feet is transparent with B.P Glass & 3 Feet with B.P. Steel)

This can be stretched to any length as desired.Bullet Proof Podium

bullet-proof-lecture-stand

Bullet Proof Lecture Stand

  • Lecture Stand can be tailor made as per the requirement
  • Lecture Stands are used for the VIP addressing in the public.
  • Bullet Proof Lecture Stand
bullet-proof-sentry-cabin

Bullet Proof Sentry Cabin

Technical Specifications of Bullet Proof Sentry Cabins

S No. Technical Specification
01 At the lower segment of the cabin, the bullet-proof (B.P) steel plate of 6.5mm thickness should cover 48” height and 48” width on each of the three sides of armour coverage.
02 At the middle segment of the cabin, the bullet-proof (B.P) glass of 50 mm thickness should cover 24” height and 48” width on all the three sides of armour coverage.
03 The firing slots between the lower B.P steel segment and the middle B.P glass segment should be of 6” height on each of all the three sides of armour coverage.
04 The upper segment of the cabin above the B.P glass segment will be made of plain, transparent toughened glass of 10 mm thickness.
05 The framework will be of M.S steel square pipe.
06 Protection level–III as per Requirements (protection from 7.62 mm SLR or AK-47 bullets or splinters of 36HE hand grenade from 10 metres)
07 Complete outer area of roof will be made of FRP.
08 Complete Outer & Inner area of the B.P. Steel will be covered with water-proof plywood.
09 The outer colour on the lower B.P steel segment will be of blue and red stripes.
10 Portable Fan & CFL Lamp with provision for electrical connection will be fitted inside the cabin.
11 Approximate weight of the security cabin should be 475 kg +/- 5%
12 All steel items should have protective anti-rust coating.
13 The door on rear-side should be made of FRP and of dimension 6-feet height and 2.5 feet width without Bullet Proof Material.
14 Minimum internal height should be 8 feet.
15 The outer surface of the roof should be such that water should not stagnate, while the cabin will give a flat-top-surface appearance
cladding-work-window-or-door

Bullet Proof Cladding work (Window or Door)

Pics for Bullet Proof Cladding work (Window or Door).

bulletproofbriefcase

Bullet proof Brief Case

Pics for Bullet proof Brief case.

bullet-proof-helmets

Bullet Proof Helmet

Bulletproof Helmet – PAS-GT developed through extensive research, by the vast experience persons in ballistic threat protection field for the ballistic evaluation for level III-A.

Bulletproof Helmet PAS-GT are made from specially woven Aramid Fabric Lamination. It’s Low weight makes it much more comfortable to wear than the traditional steel Helmet, better protection with no comfort Penalty.

The Ballistic limit for Bulletproof Helmet PAS-GT offer maximum safety in crisis situations (Its Ballistic performance is 100% better than a steel Helmet). Yet it has minimum weight. Needless to say, a PAS-GT Bulletproof Helmet is reliable defence against fragments. It also provides protection against small firearms, handgun i.e. up-to 9 mm Pistol, Revolver, and SAF Carbine from a distance of 5 meters.

Visor – (Face Shield) – are more robust attachment system to PASGT – style Helmets and Swings up and out of the way when not needed – vision protection is generally not Bullet Proof, but will protect your eyes from impact – splash, smoke particulate matter and chemicals plus fragments.

PROFILE OF CLSG (PAS-GT) BULLETPROOF HELMET

  • Higher Price.
  • High Performance/Weight Ratio.
  • No risk of Secondary Fragments and No detection by Radar.

Specifications

Fiber material Aramid Fabric
Total Weight of the Helmet < 1.5 Kg. (Without Visor)
Visor 4 mm 300 gm.
Visor 6 mm 400 gm.
Average Shell Thickness 8 mm – 10 mm
Ballistic Protection 9 mm Pistol / Revolver
SAF Carbine up to muzzle velocity of 425 meter/sec.
Meets the NIJ Standard.
Suspension System 3 Point quick release chin strap system
For the most Comfortable and Secure fit.
Fragmentation Face Shield Attached and swings up and out of the way when not needed.
Color Crinkle Matt finish OG in color. However any desired color can be provided (Olive green, Black, Woodland, Camouflage (Desert)/Camouflage (Jungle) or Camouflage SN (Snow).
Special features No risk of secondary fragments.
No detection by Radar.

Optional

Helmet Carrying Bag Face shield free of scratches and dings with padded Nylon Bag.

The Bullet Proof Helmet are Ballistically Test Approved by the Govt. of India, Ministry of Defence, Terminal Ballistic Research Laboratory (TBRL) under DRDO.